Oricom p900 User Manual
11
Pre-dialling
Pre-dial allows you to enter a telephone number and verify it on the
screen before you place the call. The screen displays the last 12 digits
dialled but you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold # . A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to
Pre-dial allows you to enter a telephone number and verify it on the
screen before you place the call. The screen displays the last 12 digits
dialled but you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold # . A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to
enter more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
DEL
to erase one digit at a time. Or
you can press
to clear the entire number and return the phone
to standby.
5. Press
to dial out the number.
Dialling from a phonebook record
1. Press during standby. in the display turns on.
2. Press
to search for the record that you would like to dial
.
Or you can use the number keys to jump directly to the record
starting with the corresponding letters of that key.
starting with the corresponding letters of that key.
3. Press
OK
repeatedly will show the name and number of the record
accordingly.
4. Press
to dial out the number.
Redialling the last dialled number
1. Press
. The last number dialled is displayed.
2.
turns on when the number contains more than 12 digits. Press
OK
to view the off-page digits.
3. Press
to dial out the number.
During an external call
Call timer
The call timer will be displayed a short while after your call is connected.
It shows the duration of the call. This timer is shown in minutes and
seconds (MM-SS) in the first hour. After that, it will be shown in hours
and minutes (HH-MM) with the “-“ blinking to indicate the seconds.
01-10