Oricom p900 User Manual
19
4. Enter the PIN of the base and press
OK
.
You will hear a confirmation tone if the registration is successful. The
handset label and the handset number will be displayed.
If the registration is not successful, you will see NOT REG on the
handset. Follow the procedure and try again.
Deregister
A handset can deregister another handset registered to the same base.
It cannot deregister itself.
1. Press
handset label and the handset number will be displayed.
If the registration is not successful, you will see NOT REG on the
handset. Follow the procedure and try again.
Deregister
A handset can deregister another handset registered to the same base.
It cannot deregister itself.
1. Press
PROG
during standby followed by the 9 key.
2. Enter the handset number (i.e. HS#2) to delete. The LCD will display
9-2.
3. Press
OK
and then
4. Enter the PIN
5. Press
5. Press
OK
to confirm.
PIN code
A PIN is required for registration and deregistration. The factory PIN is
0000 but you can change this code if you wish.
1. Press
A PIN is required for registration and deregistration. The factory PIN is
0000 but you can change this code if you wish.
1. Press
PROG
during standby followed by the 8 key.
2. Enter the current PIN and press
OK
.
3. Enter the new PIN. It can contain from 0 up to 8 digits. Press
OK
.
4. Repeat the new PIN and press
OK
to confirm the new code. You
will hear a confirmation tone if it is successful, or a reject tone if the
same PIN is not entered.
same PIN is not entered.
Reset
If you reset the phone, all the settings will return to the factory default
settings.
1. Press
PROG
during standby. Then press and hold DEL until
RESET is displayed.
2. Press
OK
to confirm the action.
You cannot reset the phone if the handset has lost the link with the base.
UNAVAIL will be displayed. Re-establish the link and try again.
UNAVAIL will be displayed. Re-establish the link and try again.