Oricom p900 User Manual

 

 

27

 
To review the current ring delay setting, 
1.  Press            during standby. The 7-segment LCD displays the 

current setting such as 

r2

 for 2 rings. 

 
To change the ring delay setting, 
 
1.  Press           for 2 seconds. The 7-segment LCD displays the current 

setting such as 

r2

 for 2 rings. 

2.  Use           or            to adjust the number of rings. 

3.  Press           again to confirm. The 7-segment LCD displays the new 

setting. 

 
Security PIN 
 
A three-digit PIN is required for remote access. The factory preset code 
is “000”. You can change it to a unique code of your own. This PIN code 
can be up to 3 digits long. 
 
 
 
 
 
To review the Security PIN, 
1.  Press        during standby. The 7-segment LCD displays the current 

PIN digit by digit. 

To change the Security PIN, 
1.  Press        for 2 seconds during standby. 

2.  Use           or            to change the first digit. 

3.  Press        to confirm the first digit. 

4.  Use           or            to change the second digit. 

5.  Press         to confirm the second digit 

6.  Use           or            to change the third digit. 

7.  Press         to confirm the third digit. The 7-segment LCD displays the 

new PIN digit by digit. 

 

NOTE: The security PIN is different from the 4-digit PIN which is used for 
registering/de-registering your handset(s).