Oricom p900 User Manual

 

 

30

 
Message waiting indication 
You have to subscribe to a voice message service (eg Telstra Message 
Bank) from your local service provider to use this feature. When you 
receive a voice message, 

 

will appear on the display. When you 

retrieve your messages the message    will turn off. You can also turn it 
off by pressing  

 for 2 seconds during standby. 

 
Paging the handsets  
You can page or locate the handsets by pressing the    on the base.  

All handsets registered to the base will produce the paging tone for 30 
seconds and the screen displays blinking “oooo”.   
You could stop the paging by pressing any key on each handset or 
pressing the    on the base again. 

 
 
Out of range warning 
 
When you are talking on the phone and you take the handset too far 
away from the base, you’ll hear an alert tone through the receiver.  You 
should bring the handset back in range with the base.  Failing to do so 
will result in the call being disconnected.   
 
When the handset is too far away from the base during standby, you will 
see   flashing. 
 
 
 
 

 
You can use these useful features if you have 2 or more handsets 
registered to the base.    
 
Answering an internal call  
When you receive an intercom call, your handset will ring with   blinking.  
You can see the calling handset number on the screen. 
If you press  

  when the phone is ringing, the handset ringer will be 

turned off for this incoming internal call. 
Press  

   to answer.