D-Link airplus xtreme g dwl-g810 User Manual
13
Operating Mode:
Select Ad-Hoc or
Infrastructure.
Select Ad-Hoc or
Infrastructure.
AP Name: You may choose
to rename your DWL-G810,
especially if you have more
than one access point on your
network.
to rename your DWL-G810,
especially if you have more
than one access point on your
network.
SSID: The Service Set
Identifier is a unique name
that identifies a network. All
devices on a network must
share the same SSID name
in order to communicate. If
you choose to change the
SSID from the default
setting, input your new SSID
name in this field. The SSID
can be up to 32 characters in
length.
Identifier is a unique name
that identifies a network. All
devices on a network must
share the same SSID name
in order to communicate. If
you choose to change the
SSID from the default
setting, input your new SSID
name in this field. The SSID
can be up to 32 characters in
length.
Network
Web Configuration (continued)
Wireless
This window displays the
default settings of the DWL-
G810. The default IP address
is 192.168.30. If you select
Dynamic IP Address, you
will obtain a dynamic IP
address from a DHCP server
on your network.
default settings of the DWL-
G810. The default IP address
is 192.168.30. If you select
Dynamic IP Address, you
will obtain a dynamic IP
address from a DHCP server
on your network.
The Subnet Mask is
255.255.255.0. Input the IP
address of the Gateway (the
router on your network.)
Click Apply if you have
made any changes.
255.255.255.0. Input the IP
address of the Gateway (the
router on your network.)
Click Apply if you have
made any changes.