Hitachi c28w40tn User Manual

  

 

Use this socket to

connect ordinary VHS,

S-VHS or Hi8 equipment 

to your TV. It is also used

for digital output.

The 18V power

output socket is specifically

designed for HITACHI

accessories - under no

circumstances connect any

other accessory to this 

socket  as this could cause 
irreparable damage to your 

equipment.    

Use these connections to attach your leads to the amplifiers and speakers:

S is for the surround amplifier and speakers

C is for the centre amplifier and speaker

R is for the right amplifier and speaker

L is for the left amplifier and speaker

Once connected de-activate 3DS system (see page 28) and set Speaker Setup to WIDE or NORMAL

mode (see page 30) - with this configuration, using 5 external speakers full Dolby Pro Logic can be

achieved enhancing your viewing and listening experience.

 

 

Use this to connect digital video

broadcasting equipment, home

computers and home entertainment

systems to your TV. Output from this

connector can be selected. See AV

setup on page 32.

This should be

permanently connected to

an RF source - i.e your

aerial antenna.

The DIN sockets are

used to connect two

external speakers for which

no amplifier is necessary.

R is for the right external

speaker, and L is for the

left external speaker. 

If you have purchased your TV complete with Hitachi’s power console please refer to the Users

Guide supplied with the equipment.

Your HITACHI dealer can also advise you on the correct amplifier and speaker choice for your TV. 

Before connecting

external equipment,

please consult 

AV setup on page 32.