Oricom pro600 dect User Manual

Getting Started

Installation and Charger
1. Connect the mains adaptor (supplied) to the socket on

the back of the base unit and to the wall mains supply.

2. Connect the telephone cord to the phone socket on the

back of the base unit and into the wall phone socket.

3. Insert 2 rechargeable Ni-MH AAA

1.2V 800mAh batteries (included),

observing the correct polarity, into

the battery compartment on the

handset. Slide the battery door firmly into place.

4. Place the handset on the charging cradle and charge the

batteries for a full 15 hours before using it for the first time.

Select your country

After the phone is fully charged you will need to select
your country. The phone will display Welcome. Press
[ ]. Scroll [ ] or [ ] to select Australia or New
Zealand. Press [ ] again to confirm.

Note:

It may take some time for the cordless handset to power up,

and it may get warm during initial charge. This is normal.

It is good practice to put the cordless handset on the charging

cradle when it is not in use to ensure that the handset is always

fully charged.

DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS

PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR

INJURY. USE ONLY NI-MH RECHARGEABLE BATTERIES AS

SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR

REPLACEMENT BATTERIES.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended

type supplied with this product.
• Never use alkaline or lithium batteries.
• Do not dispose of the batteries in a fire, as they can

explode.

• Do not open or mutilate the battery. Released electrolyte is

corrosive and can cause damage to the eyes or skin. It can

be toxic if swallowed.

• Avoid contact with metal objects when handling the

battery. These objects could short out the batteries or

cause the conductor to overheat resulting in burns.

• Do not attempt to recharge the battery cell by heating it.

Sudden release of battery electrolyte can cause burns or

irritation to the eyes or skin.

• Observe the proper polarity, or direction, of any battery.

Reverse insertion of the battery cell can result in leakage

or explosion.

• Remove the batteries if you do not plan to use the product

for several months at a time.

• Follow the local regulations regarding the disposal of your

packing materials, exhausted batteries and used phone.

Wherever possible, recycle those materials.

WARNING

Pro_600_800.indd 2

2008-11-11 16:17:30