Korg SV-1 User Manual
RX Noise page | The RX Noise section – 53
English
RX Noise page
This page is only available when the selected sound contains RX Noises. To see if
a sound contains RX Noises, please check with the “Factory sounds” table on
page 64.
a sound contains RX Noises, please check with the “Factory sounds” table on
page 64.
This is where you can adjust the volume and equalization of the RX Noises in the
sound in edit (assuming it includes this feature). These settings can be saved
when you click the Write Current Preset button in the side drawer.
sound in edit (assuming it includes this feature). These settings can be saved
when you click the Write Current Preset button in the side drawer.
HINT: To only listen to the RX Noises, turn the FX BYPASS on in this page, turn the
AMP MODEL on (see “Amp Model section” on page 34), and set the PROG LEVEL to
zero (see “Cabinet Model section” on page 39).
AMP MODEL on (see “Amp Model section” on page 34), and set the PROG LEVEL to
zero (see “Cabinet Model section” on page 39).
T
HE
RX N
OISE
SECTION
Here you can turn the RX Noises on or off and adjust the global volume. Also,
you can use the FX BYPASS button to send the RX Noises to the effects or not.
Use the ON switch to turn the RX Noise section on/off.
you can use the FX BYPASS button to send the RX Noises to the effects or not.
Use the ON switch to turn the RX Noise section on/off.
Parameters
Values
Notes
Volume
0…127
Adjusts the output level of the RX Noises.
FX Bypass
On, Off
When off, the RX Noises are sent to the effects. When
on, they are sent to the outputs dry.
on, they are sent to the outputs dry.
SV1-100-EditorGuide-EFGI.book Page 53 Wednesday, June 3, 2009 12:35 PM