Oricom eco600 User Manual

The System

VOICEMAIL INDICATION

Voicemail indication is a visual voicemail alert. On the ECO600, you see an envelope icon when

there is a voicemail waiting in your service providers mailbox(es).

Retrieving voicemail(s)

To retrieve your voicemail(s), consult your service providers instructions.

Clearing the voicemail indicator

After checking your voicemail(s), the voicemail indicator will be cleared automatically after
receiving a signal from the network. If you want to, you can also clear the voicemail indicator

manually if it fails to reset.

1. Reset the power of the base unit (Unplug the power adaptor of the base unit. Wait for

30 seconds. Plug in the power adaptor again.) The voicemail indicator will be cleared.

The System

REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not

registered, you will not be able to make a call or use some of the functions and features on the
phone.

If your handset displays

UNREGISTERED

, follow the steps below to register your handset.

1. Press PAGE on the base unit for 4 seconds.

2. Press

on the handset.

3. Select

SYSTEM

. Press

4. Enter the system PIN (Pre-set: 0000). Press OK.
5. Press 1 to select the base number you want. Your handset starts searching for the base.

Registration shall be completed within 30 seconds. If registration is successful, the signal
icon displays steadily. If registration failed, repeat the above procedure.

NOTE:

Your base can register up to 4 handsets. After registering 4 handsets,

your base unit registration memory is full. If you attempt to register an
additional handset, registration will not be successful.

NOTE:

Your handset is already registered when you buy 1-4 handset packs.

NOTE:

Voicemail Indication Service. Consult and subscribe from your service

providers service.

TIP:

Use

to navigate the menus.