Q-Logic 3100 User Manual

3–Quick Start
Linux Driver Installation

3-4

NE0154601-00  C

4.

Follow the instructions on the screen to complete the installation.

For more details on the Windows Server 2008 driver installation, refer to 

.

To configure the QLogic adapter:

1.

Click the Start button, and then select Network Connections.

2.

Verify that QLogic adapter icon says Connected. 

3.

Assign an IP address to the network interface.

Download the driver package from the QLogic Web site, 

.

 for more information.

If you have a previous version of the QLogic adapter driver, perform the following 
steps to remove the driver and tools package:

1.

Type: 

2.

Type:

ifconfig eth[n] down

3.

Type: 

4.

Type:

rpm -e nx_nic-[version]

5.

Type:

rpm -e nx_tools-[version]

To install the driver on a Red Hat system:

1.

Type the following command to extract the driver:

tar -zxvf qle30xx_qle31xx-src-[version].tar.gz