Microboards Technology gx-1 User Manual
• Assembly and Installation
8
GX-1 Disc Publisher Installation
The GX-1 Disc Publisher installation disk includes an Installer that will walk
you through the process step by step. Please use the Installer and follow the
installation steps in order.
The following installation sections are intended only as a reference for the installation process, not as
a guide to installing the GX-1 Disc Publisher. Performing the installation out of order could result in
an unsuccessful installation.
a guide to installing the GX-1 Disc Publisher. Performing the installation out of order could result in
an unsuccessful installation.
The GX-1 Disc Publisher Installation Quick Reference Guide will show you the order in which the
installation will occur.
installation will occur.
Connecting to a PC
DO NOT CONNECT YOUR GX-1 DISC PUBLISHER TO A COMPUTER BEFORE
RUNNING THE INSTALLER LOCATED ON THE INSTALLATION DISK!!
The connection between the PC and the Microboards GX-1 Disc Publisher is done with one USB
cable.
cable.
1. Confirm that the power is turned OFF on the GX-1 Disc Publisher and on your PC.
2. Plug in the AC power cord to the back of the GX-1 Disc Publisher. Do not turn on power to
the GX-1 Disc Publisher until an ink cartridge has been installed.
3. Connect the square shaped end of the USB cable to the back of the GX-1 Disc Publisher.
4. Connect the flat, rectangular end of the USB cable into a USB 2.0 port in
your PC.