Ryobi SA720 User Manual

Page 7

Chuck

3/8 in. (10 mm) Keyless

3/8 in. (10 mm) Keyless

Motor

DC Motor 6.0 Volt

DC Motor 7.2 Volt

Switch

Two Speed

Two Speed

No Load Speed

300 / 500 RPM

330 / 500 RPM

Clutch

24 Positions

24 Positions

Charger Input

120 V, 60 Hz, AC only

120 V, 60 Hz, AC only

Charge Rate

3-6 Hours

3-6 Hours

Torque

Maximum 45 in.lb.

Maximum 50 in.lb.

When unpacking the tool:

■

Carefully remove the tool and accessories from the box.

■

Make sure that all items listed in the packing list are in-
cluded.

■

Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.

■

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.

■

If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

Cordless Drill

Charger (Model SA720 only)

Battery Pack  (Model SA720 only)

Operator’s Manual

Case (Model SA720 only)

If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.

You may use the two speed drill for the purposes listed below:

■

Drilling in wood

■

Drilling in ceramics, plastics, fiberglass, and laminates

■

Drilling in both hard and soft metals

■

Using driving accessories, such as driving screws with screwdriver bits

■

Mixing paints