Viewsonic PJ400 User Manual

ViewSonic PJ400 

16 

WARNING  ►When the power is on, a strong light is emitted. Do not look 

into the lens or vents of the projector. 

NOTE  • Turn the power on in right order. Please power on the projector before the 
connected devices. 

                                     

   

 

 

1. Make sure that the power cord is firmly and correctly connected to the projector 

and outlet. 

2. Open the lens cover, and set the power switch to the ON position. 

The power indicator will light to solid orange. Then wait several seconds 
because buttons may not function for these several seconds. 

3. Press the STANDBY/ON button on the projector or remote control.   

The projector lamp will light up and the POWER indicator will begin blinking 
green. When the power is completely on, the indicator will stop blinking light 
green. 

 

To display the picture, select an input signal according to the section "Selecting an 
input signal"

 ( 18)

. 

POWER indicator 

STANDBY/ON 

button 

Power switch