Viewsonic PJ400 User Manual
ViewSonic PJ400
29
PICTURE menu (continued)
Item Description
PROGRESSIVE Using the buttons ▲/▼ switches the progressive mode.
TV FILM TURN OFF
═════════
═════════
• This function performs only at an interlaced signal of a
VIDEO input, a S-VIDEO input or a component video input of
525i (480i) or 625i (576i) signal.
• When the TV or FILM is selected, the screen image will be
crisper. The FILM mode is adaptable to the 2-3 Pull-Down
system to the conversion. (not adaptable to the 2-2 Pull-Down
system) But these may cause a certain defect (for example,
jagged line) of the picture at a quick moving object. In such a
case, please select the TURN OFF, even though the screen
image may lose the crisp.
VIDEO input, a S-VIDEO input or a component video input of
525i (480i) or 625i (576i) signal.
• When the TV or FILM is selected, the screen image will be
crisper. The FILM mode is adaptable to the 2-3 Pull-Down
system to the conversion. (not adaptable to the 2-2 Pull-Down
system) But these may cause a certain defect (for example,
jagged line) of the picture at a quick moving object. In such a
case, please select the TURN OFF, even though the screen
image may lose the crisp.
MY MEMORY Choosing a mode of MY MEMORY using the buttons ▲/▼
and then pressing the button ► or the ENTER button performs
each function.
each function.
LOAD1 LOAD2 LOAD3 LOAD4
SAVE4 ⇔ SAVE3 ⇔ SAVE2 ⇔ SAVE1
SAVE4 ⇔ SAVE3 ⇔ SAVE2 ⇔ SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads
the data on the memory whose number corresponds with the
command’s number, and adjusts the picture automatically
depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the
current adjustment data on the memory whose number
corresponds with the command’s number.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads
the data on the memory whose number corresponds with the
command’s number, and adjusts the picture automatically
depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the
current adjustment data on the memory whose number
corresponds with the command’s number.