Viewsonic PJ400 User Manual
ViewSonic PJ400
32
INPUT menu
With the INPUT menu, items shown in the table below can
be performed.
be performed.
Choose
an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item Description
COLOR
SPACE
Using the buttons ▲/▼ switches the mode for color space.
AUTO RGB SMPTE240 REC709 REC601
════=══=══=══=══=══=══=════
════=══=══=══=══=══=══=════
• This item can be chosen only at a RGB signal or a component
video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In
such a case, it might be good to select the SMPTE240 or the
REC709.
video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In
such a case, it might be good to select the SMPTE240 or the
REC709.
VIDEO
FORMAT
Using the buttons ▲/▼ switches the mode for video format.
AUTO NTSC PAL SECAM
N-PAL M-PAL NTSC4.43
N-PAL M-PAL NTSC4.43
• This item performs only at a video signal from the VIDEO
port or the S-VIDEO port. For a component video signal, the
signal type is identified automatically, independently of this
function.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
port or the S-VIDEO port. For a component video signal, the
signal type is identified automatically, independently of this
function.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.