Hitachi cl2842an User Manual

Page of 22
GB   - 19 -
To exit Teletext
• Press “TV” button. The screen will switch to TV
mode.
To Display the Time
• While watching a TV programme with Teletext trans-
mission press “ 
 “ button. The current time infor-
mation, captured from Teletext will be displayed at the
upper right corner of the screen.
• If the programme being watched does not have Tele-
text transmission, only a blue box will be displayed at
the same location.
• The time information will disappear after pressing “
 “ button again.
When time information is displayed on screen, entering
another menu  will remove it, but after leaving that menu
time information will appear again.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not
use abrasive solvents as they may damage the TV
screen coating layer.
Poor Picture
Have you selected the correct TV system? Is your TV
set or house aerial located too close to the
loudspeakers, non-earthed audio equipment or neon
lights, etc. ?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
No Picture:
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving any
transmission. Have you pressed the correct keys on the
remote control? Try once more.
Sound:
Sound is coming from only one of the speakers. Is the
balance set to one direction extreme? See SOUND
menu.
Remote Control:
Your TV no longer responds to the remote control.
Press the “TV” button on the remote control once more.
Perhaps the batteries are exhausted. If so you can still
use the local keys at the front of your TV.
Have you selected the wrong menu? Press “TV” key to
return to TV mode or press “
 MENU
” to return to the
previous menu.
No solution:
Switch your TV set off and on. If this does not work, call
the service personnel; never attempt to repair it yourself.