Microboards Technology qd-127 User Manual
10
8. Edit Track
8-01. Edit Track
CD to CD Edit
CD to CD Edit
Select Track:
1/16 04:53
1/16 04:53
Select Track:
+ 1/16 04:53
+ 1/16 04:53
Select Track:
End 1Track 04:53
End 1Track 04:53
End Edit Disc
And burn? YES
And burn? YES
Copying – 52x Edit
1/16 → 1/1
1/16 → 1/1
Burn Complete!
OK: 07
OK: 07
Place the master disc into the TOP reader drive. Press the ENT button. The source is
analyzed.
The following screen appears:
The following 4 screens display a variety of information about the master disc. The screens
are reached by pressing the ▼▲ buttons.
analyzed.
The following screen appears:
The following 4 screens display a variety of information about the master disc. The screens
are reached by pressing the ▼▲ buttons.
Edit Track
The Edit Track function allows you to select multiple tracks from different master discs and
place them on one Audio CD. The maximum number of tracks that can be written to the CD
is 99. In the Edit Track function, there are three options: CD to CD Edit, Play Audio Track
and Close Session. Play Audio Track will not apply if the drives do not have headphone
jacks on the front drive panels.
place them on one Audio CD. The maximum number of tracks that can be written to the CD
is 99. In the Edit Track function, there are three options: CD to CD Edit, Play Audio Track
and Close Session. Play Audio Track will not apply if the drives do not have headphone
jacks on the front drive panels.
Important Note
: The CD+G value must be set to OFF in order to use the Track Extraction
feature. Please see the Adv. Setup menu on page 15-17 for more details.
CD to CD Edit
To use the CD to CD function, press the ▼▲ buttons until the
display reads:
Press the ENT button. The following screen appears:
1. Place the first master audio CD into the CD reader drive. Place the blank CDs into the
display reads:
Press the ENT button. The following screen appears:
1. Place the first master audio CD into the CD reader drive. Place the blank CDs into the
recorder drives. Press the ENT button.
The following screen appears:
2. To select a track that you want to burn to the blank disc, press
2. To select a track that you want to burn to the blank disc, press
the ENT button. This will put a + symbol in front of that track:
3. Press
the
▼▲ buttons to scroll through the tracks on that CD, selecting the tracks you
wish to record.
4. Once all of your tracks are selected for that master, press
the ▼ button until the display reads:
This screen shows the total number of tracks selected from the master disc and the total time
of those tracks.
5. Press the ENT button. The following screen appears:
Note: Pressing the ▼ button and selecting NO takes you
back to Editing tracks.
of those tracks.
5. Press the ENT button. The following screen appears:
Note: Pressing the ▼ button and selecting NO takes you
back to Editing tracks.
6. Press the ENT button to begin recording the selected tracks
to the blank disc. The following screen appears:
7. Once the tracks are copied to the blank discs, the following
screen appears:
Source Disc
(Analyzing)
(Analyzing)
Total 01 Sessions
Total 01 Tracks
Total 01 Tracks
Total: 04:15
Total: 37.0MB
Total: 37.0MB
Session 01
Track 01 - 01
Track 01 - 01
Track 01
CDXA 37.0MB
CDXA 37.0MB