Dynex DX-32L152A11 User Manual

32" LCD TV

DX-32L152A11

Remote control 

and 

2 AAA batteries

TV stand and screws

HDMI cable 
(not included)

HDMI device

Back of TV

N

Video device

Composite audio/video 
cable (not included)

Back of TV

Antenna cable

Component video device

Back of TV

Component video cable

Composite 

cable

Home theater 
system

Digital coaxial cable

Back of TV

1   Remove the stand from the box and place it on a table or bench.
2   Lay the TV on a flat, cushioned surface.
3   Align the base with the bottom of the TV, then secure the base to the TV 

with the three screws provided.

1   Carefully place your TV screen face-down on a cushioned, clean surface to 

protect the screen from damages and scratches.

2   Remove the pedestal stand. See “Removing the stand” in your User Guide.
3  Secure the wall-mount bracket to the back of your TV using the four screws 

provided with the bracket.

Note: Cable connectors and jacks are often color-coded. Match the colors 
when you connect the component video and AV cables. 

Note: Cable connectors and jacks are often color-coded. Match the colors 
when you connect the composite AV cable. 

Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back 
of your TV and the RF OUT jack on the antenna.

Note: The DIGITAL OUTPUT jack only works with digital TV channels.

Connect the power cable to a power outlet. 

1   While pressing the release button on the battery compartment cover on 

the back of the remote, lift the cover off the remote.

 

2   Insert two AAA batteries into the battery compartment. Make sure that the 

+ and – symbols on the batteries align with the + and – symbols in the 
battery compartment.

3   Replace the cover. Make sure that the lock snaps into place.

To program your existing remote control to work with your Dynex TV, see the 
table below for common codes. If you have problems programming your 
remote, or need a different remote control code, visit 
www.dynexproducts.com for the latest remote control code information.

For step-by-step instructions on programming the remote control, see your 
User Guide. 

Philips

PHDVD5, PH5DSS,

PMDVR8, PDVR8

 

DirectTV

RC23

RCA

RCU807

One for All

URC-6690

Sony

RM-VL600

 

Comcast

M1057

 

Dish Network

VIP508, VIP622

 

Motorola

DRC800

 

TIVO

Series 3, HD

 

(for all Dynex TVs manufactured after Jan. 1, 2007)

Power 

indicator

Remote control 
sensor