Runco cinemawall xp-65 User Manual
CinemaWall XP-50/XP-65 Installation/Operation Manual
25
PRE
L
IMINAR
Y
4:3(1)
4:3
4:3 (4:3(1)) linearly scales
the source image horizon-
tally and vertically to fill a 4:3
screen. Side panels are dis-
played at the left and right
edges of the screen.
the source image horizon-
tally and vertically to fill a 4:3
screen. Side panels are dis-
played at the left and right
edges of the screen.
4:3(2)
–
4:3(2) displays a 16:9
source image in its original
aspect ratio and masks the
left and right sides.
source image in its original
aspect ratio and masks the
left and right sides.
FILL
FILL
FILL is similar to
VIRTUALWIDE2 (see
above), but employs a lin-
ear, horizontal stretch.
VIRTUALWIDE2 (see
above), but employs a lin-
ear, horizontal stretch.
Note: This setting is not
available with SD signals.
available with SD signals.
LETTER-
BOX1
LETTER-
BOX
LETTERBOX
(LETTERBOX1) scales
(zooms in on) a 4:3 image
linearly (by the same
amount on all sides) to fill a
16:9 display, cropping the
top and bottom of the
image.
(LETTERBOX1) scales
(zooms in on) a 4:3 image
linearly (by the same
amount on all sides) to fill a
16:9 display, cropping the
top and bottom of the
image.
16:9 images are vertically
scaled by a factor of
approximately 1.33, but the
width is unchanged.
scaled by a factor of
approximately 1.33, but the
width is unchanged.
LETTER-
BOX2
–
LETTERBOX2 scales
(zooms in on) a 16:9 image
linearly (by the same
amount on all sides) to fill a
16:9 display, cropping the
image on all sides.
(zooms in on) a 16:9 image
linearly (by the same
amount on all sides) to fill a
16:9 display, cropping the
image on all sides.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio Setting
(Note)
Input Image -> Displayed Image
Description
All Aspect
= ON
All Aspect
= OFF
Note: To make all of the aspect ratio selections listed here available to the viewer, set All Aspect in
the OPTIONS menu (described on page 51) to On.
the OPTIONS menu (described on page 51) to On.