Runco cinemawall xp-65 User Manual
38
CinemaWall XP-50/XP-65 Installation/Operation Manual
PRE
L
IMINAR
Y
Use the controls in the SET UP menu to perform advanced image quality adjustments and
access various other CinemaWall features.
access various other CinemaWall features.
SIGNAL: Select SIGNAL from the SET UP menu to display information about the current
signal and to adjust the following settings:
signal and to adjust the following settings:
• SYNC: Select the sync method used by the PC or other RGB source using the PC
INPUT.
In most cases, the AUTO setting works well. However, if you know that your source
outputs an RGB with sync-on-green signal and the AUTO setting does not produce a
stable image, select ON G. Likewise, select VBS for a source that outputs an RGB with
composite sync signal.
outputs an RGB with sync-on-green signal and the AUTO setting does not produce a
stable image, select ON G. Likewise, select VBS for a source that outputs an RGB with
composite sync signal.
• 3:2 PULLDOWN: To smooth out moving images from interlaced, standard-definition
(SD) sources, select 3:2 PULLDOWN and set it to ON. With this setting, the
CinemaWall attempts to reproduce a more natural interpretation of sources such as
movie pictures, which are recorded at 24 frames per second. If the image is not stable,
set 3:2 PULLDOWN to OFF.
CinemaWall attempts to reproduce a more natural interpretation of sources such as
movie pictures, which are recorded at 24 frames per second. If the image is not stable,
set 3:2 PULLDOWN to OFF.
➤
COMPONENT/RGB-IN SELECT
COMPONENT
INPUT LABEL
DVD3
POWER SAVE
ON
STANDBY SAVE
OFF
POWER MANAGEMENT
ON
AUTO POWER OFF
ON
OSD LANGUAGE
ENGLISH (US)
SET UP
SELECT
RETURN
ACCESS
SIGNAL
SCREENSAVER
1/2
SET UP
SELECT
RETURN
ACCESS
MULTI DISPLAY SETUP
MULTI PIP SETUP
PORTRAIT SETUP
SET UP TIMER
PRESENT TIME SETUP
2/2