Casio KL-100 User Manual

SIZE

JUST (2

×2)

EFFECT

CANCEL

STYLE

NORMAL

MIRROR

OFF

M-FEED

NO

6mm

OFF

INT?

This section contains information about the Label Printer that you can use as
reference when you need it.

A dirty printer head and roller can result in poor printing quality. If you have
problems with print quality, use the following procedure to clean the printer head
and roller.

1. Make sure the Label Printer is turned off.
2. Turn over the Label Printer, and open the back cover while pressing down

on its lock.

3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean

the printer head and roller as shown in the illus-
tration.

5. Replace the tape cartridge and close the back cover.

The following are the initial settings of the Label Printer whenever you turn it
power on.

If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.

Important!
• Initializing the Label Printer deletes all memory contents. Make sure you have

a back-up copy of text stored in memory if you need it.

1. Turn power off.
2. While holding down the PRINT and ESC keys,

press ON to turn power on.

3. Keeping PRINT and ESC held down, release

the ON key only.

• This prompt confirms whether or not you want to

initialize the Label Printer.

4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
• The following table shows the initial settings.

Roller

Print head