Uniden BC246T User Manual

46

• Priority On: While scanning a conventional system, 

the scanner interrupts every 2 seconds and checks 
the priority channels in each unlocked conventional 
system. Priority channels in lower priority key num-
bered systems (starting from 1) have highest priority. 
Pri

 appears when you select this mode.

• Priority Plus: The scanner only scans priority 

channels in unlocked conventional systems. 
Pri

  flashes when you select this mode.

 

 

 Set Backlight 

 E

• 10 sec  The backlight stays on for 10 seconds after 

you press 

. 

• 30 sec  The backlight stays on for 30 seconds after 

you press 

. 

• Squelch The backlight turns on when the squelch 

opens then stays on for 5 seconds.

• Keypress  The backlight turns on when any key is 

pressed then stays on for 10 seconds.

• Infinite  The backlight turns on when you press 

 

then stays on until you press 

 again.

Pressing any key while the backlight is on extends the 
backlight period. Pressing 

 while the backlight is on 

turns off the backlight.

To initialize the scanner’s memory, turn off the scanner. 
Then, press 2, 9, and Hold while turning it on.

Important! This deletes all preprogrammed data. 
You cannot restore preprogrammed data that has 
been deleted.