Curtis tc590 User Manual
7. Install the HANDSET BATTERY PACK by
plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
inside the BATTERY COMPARTMENT.
8. Place the BATTERY PACK inside the
BATTERY COMPARTMENT.
9.
Slide the HANDSET
BATTERY
COMPARTMENT COVER firmly into place in
its closed position.
its closed position.
10. IMPORTANT: Before initial use, charges the
HANDSET for 12 hours. Place the HANDSET
on the BASE UNIT or CHARGER UNIT with
TELEPHONE KEYPAD face up, and make
sure that the CHARGER UNIT LED indicator
lights up.
on the BASE UNIT or CHARGER UNIT with
TELEPHONE KEYPAD face up, and make
sure that the CHARGER UNIT LED indicator
lights up.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select
Switch to the TONE position.
Switch to the TONE position.
B. If you have a rotary dialing system, set the TONE/PULSE Select Switch to
the PULSE position.
C. If you are not sure which system you have, set the TONE/PULSE Select
Switch to the TONE position. Press the Talk button on the HANDSET and
make a call. If the call connects, leave the switch as is; otherwise set to the
PULSE position.
make a call. If the call connects, leave the switch as is; otherwise set to the
PULSE position.
12. Set the date and time on the HANDSET. (See page 25 for details.)
Belt Clip Installation
With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK
into the matching slot at the top side of the HANDSET. Press down on the opposite
side of the BELT CLIP until the other hook locks into the slot on the side of the
HANDSET.
With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK
into the matching slot at the top side of the HANDSET. Press down on the opposite
side of the BELT CLIP until the other hook locks into the slot on the side of the
HANDSET.
CAUTION: The cordless telephone operates
at a frequency that causes interference to
nearby TVs and VCRs or Microwave; the
base phone should not be placed near, or on
top of a TV ,VCR or Microwave. If
interference is experienced, moving the
cordless telephone farther away from the
TV/VCR/Microwave will often reduce or
eliminate the interference.
at a frequency that causes interference to
nearby TVs and VCRs or Microwave; the
base phone should not be placed near, or on
top of a TV ,VCR or Microwave. If
interference is experienced, moving the
cordless telephone farther away from the
TV/VCR/Microwave will often reduce or
eliminate the interference.
Getting Started
BELT CLIP
HOOK
HOOK
10