Hanna Instruments hi 955501 User Manual

5

3

Slide the battery cover off
the rear of your thermom-
eter.

Remove the battery and un-
wrap it prior to connection to
the battery connector. Insert
the 9V battery and replace
the cover.

To switch on, press the ON/
OFF key on the front of the
unit.

If a temperature probe is
plugged in, the unit will dis-
play the temperature.

If not plugged in, the display
will show "

-1.

".

To switch your thermometer off, press the
ON/OFF key again.

When switched on, the instrument defaults
to the last selected resolution.

To change the resolution
press RANGE.

The instrument automatically
changes its resolution to 1
degree when it passes the
limit of the lower range
(±200°C).

9 VOLT BATTERY

SLIDE OFF

ON

OFF

°C

RANGE

Untitled-9

6

4

When the battery is low the
user is prompted by the ap-
pearance of the "V" symbol
to replace the battery.

V

The probe is not connected to the instrument or
the reading is out of range

Weak battery, needs to be replaced

The instrument is reading in the Centigrade
scale

All Hanna Instruments thermometers have
been accurately pre-calibrated at the fac-
tory.

It is generally recommended to have all
thermometers recalibrated at least once a
year.

For an accurate annual recalibration, con-
tact your nearest Hanna Service Center.