Casio TE-3000S User Manual
Getting Started
14
E
To install journal paper
Step 1
Turn the mode switch to
REG1 position.
REG1 position.
Step 2
Remove the printer cover.
(If the cover is locked, unlock
by using the printer cover key
before this step.)
(If the cover is locked, unlock
by using the printer cover key
before this step.)
Step 3
Open the platen arm.
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 5
Put the leading end of the
paper over the printer.
paper over the printer.
Step 6
Close the platen arm slowly
until it locks steadily.
until it locks steadily.
Step 7
Slide the leading end of the
paper into the groove on the
spindle of the take-up reel and
wind it onto the reel two or
three turns.
paper into the groove on the
spindle of the take-up reel and
wind it onto the reel two or
three turns.
Locking platen
REG2
X1
REG1
Z1
OFF
X2/Z2
RF
PGM
Step 8
Place the take-up reel into
place behind the printer,
above the roll paper.
place behind the printer,
above the roll paper.
Step 9
Press the
j
key to take up
any slack in the paper.
During machine
installation, press the
j
key after power on.
Complete
Close the printer cover.