VTech vt-2420 User Manual
6
Enter Base ID Code
1.
After charging the Handset, remove
it from its Charge Cradle, the
screen will display:
it from its Charge Cradle, the
screen will display:
2.
Press
NEW, then enter the 15 digit
Base Unit ID code, located on the
underside of the Base Unit.
underside of the Base Unit.
3.
Press
OK. The Handset will display:
PLEASE WAIT!!
4.
Wait approximately 15 seconds.
The Handset will display:
The Handset will display:
FOUND BASE
If the Handset displays: BASE
BUSY TRY LATER, this indicates
that the system is in use. Wait until
the Base Unit is in the idle (on
hook) mode, and repeat step 2 to
4.
BUSY TRY LATER, this indicates
that the system is in use. Wait until
the Base Unit is in the idle (on
hook) mode, and repeat step 2 to
4.
Congratulations! You can now enjoy the
benefits of your VTECH multi-Handset
system.
benefits of your VTECH multi-Handset
system.
Registration
Getting Started