Hotpoint aqgmd149 User Manual

Page of 16
GB
4
As the colours of the wires in the lead may not
correspond  with  the  coloured  markings  identifyng
the  terminals  in  your  plug,  proceed  as  follows:
Connect Green &  Yellow wire to terminal marked E
or   or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked L or
coloured  Red.
Connect Blue wire to terminal marked  N or coloured
Black.
If a 13 amp plug (BS 1363) is used it must be fitted
with a 13 amp fuse, either in the plug or adaptor or
at the distribution board.
If you are in any doubt the electrical supply to your
machine,  consult  a  qualified  electrician  before  use.
How to connect an alternative plug:
The wires in this mains lead are coloured in
accordance with the following code:
BLUE
NEUTRAL  (N)
BROWN
LIVE  (L)
GREEN  &  YELLOW
EARTH  (E)
Disposing  of  the  appliance:
When disposing of the appliance please remove the
plug by cutting the mains cable as close as possible
to the plug body and dispose of it as described
above.
 The washing machine should not be installed in an
outdoor environment, not even when the area is
sheltered, because it may be very dangerous to
leave it exposed to rain and thunderstorms.
 When the washing machine is installed, the mains
socket  must  be  within  easy  reach.
 Do not use extensions or multiple sockets.
 The  power supply cable must never be bent or
dangerously  compressed.
 The power supply cable must only be replaced by
an  authorised  serviceman.
Warning! The company denies all liability if and when
these  norms  are  not  respected.
GREEN &
YELLOW
BROWN
BLUE
13 ampere fuse
CROSS-BAR
CORD GRIP