Casio CW-L300 User Manual

15 

E

Use

and

to select PRINT, and then press SET .

Use 

and

 to select TAPE, and then press SET.

• Pressing 

and

toggles the selection on the above screen between

DISC and TAPE.

Use

and

to select the label area data you want to print first, and

then press SET.

• The above step is not necessary if your label has data in only one of the

label areas. In this case, go directly to step 7.

• Here we will select AREA A.

Use the number keys (or 

and

) to specify the number of copies,

and then press

.

• You can specify a value from 1 to 100 for the number of copies.

Use 

and

 to select the tape cut mode (page 38), and then press

SET.

When printing is complete, the screen shown below will appear on the

display.

• The above display will not appear if your label has data in only one of the

label areas. In this case, skip steps 10 and 11, and go directly to step 12.

Use

and

to select the label area data you want to print next, and

then press SET.

• Here we will select AREA B.

 Repeat steps 7 through 9 above to print in the other label area.

The following screen will appear when printing is complete.

Press

and

to select EXIT, and then press SET.

• Use  STORE if you want to save the data. See page 54 for more

information.

Press SET to exit the print operation.

Upper label area

Lower label area