Ryobi SA120 User Manual
Page 7
INSTRUCTIONS
When unpacking the tool:
■
Carefully remove the tool and accessories from the box.
■
Make sure that all items listed in the packing list are in-
cluded.
cluded.
■
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
damage occurred during shipping.
■
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
fully inspected and satisfactorily operated the tool.
■
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
1-800-525-2579 for assistance.
PACKING LIST
Cordless Drill
Charger
Battery Pack
28 Piece Bit Kit
Operator’s Manual
Case
WARNING:
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
You may use the two speed drill for the purposes listed below:
■
Drilling in wood
■
Drilling in ceramics, plastics, fiberglass, and laminates
■
Drilling in both hard and soft metals
■
Using driving accessories, such as driving screws with screwdriver bits
■
Mixing paints
UNPACKING
APPLICATIONS
SPECIFICATIONS
DRILL-DRIVER
SA960
SA120
Chuck
3/8 in. (10 mm) Keyless
3/8 in. (10 mm) Keyless
Motor
DC Motor 9.6 Volt
DC Motor 12 Volt
Switch
Variable Speed
Variable Speed
No Load Speed
0 - 550 RPM
0 - 550 RPM
Clutch
24 Positions
24 Positions
Charger Input
120 V, 60 Hz, AC only
120 V, 60 Hz, AC only
Charge Rate
3-6 Hours
3-6 Hours
Torque
Maximum 90 in.lb.
Maximum 95 in.lb.