Bestop 29261 User Manual
29261 1
Rev.
B 0204
Parts List
Seat Cover- Right, Qty - 1
Seat Cover - Left, Qty - 1
Warning:
This product is designed to enhance the appearance of the vehicle and
to shield the occupants from ordinary weather conditions. Do not rely in
any way on the components of this product to contain occupants within
the vehicle, or to protect against injury or death in the event of an acci-
dent. This product will not protect the occupants from falling objects.
Never operate vehicle in excess of manufacturer's specifications.
to shield the occupants from ordinary weather conditions. Do not rely in
any way on the components of this product to contain occupants within
the vehicle, or to protect against injury or death in the event of an acci-
dent. This product will not protect the occupants from falling objects.
Never operate vehicle in excess of manufacturer's specifications.
Wear seat belts at all times.
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit and could
place occupants of the vehicle in a potentially dangerous situation.
installing this product. Failure to do so may result in a poor fit and could
place occupants of the vehicle in a potentially dangerous situation.
Seat Covers are not waterproof.
Warning:
DO NOT remove
the seats from the vehicle
to install this product.
to install this product.
Step One
Refer to your Owner's Manual for instructions to remove the
headrest.
headrest.
Orient the Seat Cover with the quilting toward the front of the
seat. Slip the opening in the cover over the seat back and
pull the cover down to the seat bottom. Make sure that the
security cord on the bottom of the cover goes around and
under the outside of the plastic cover of the seat recliner
mechanism and tuck the fabric under the mechanism cover.
seat. Slip the opening in the cover over the seat back and
pull the cover down to the seat bottom. Make sure that the
security cord on the bottom of the cover goes around and
under the outside of the plastic cover of the seat recliner
mechanism and tuck the fabric under the mechanism cover.
Pull Cover over
back of seat
back of seat
Tuck Flap between
Seat Back and Bottom
Seat Back and Bottom
Remove
Headrest
Headrest
Step Two
Locate the flap sewn to the inside of
the cover at the corner between the
seat back and the seat bottom. Tuck
the flap between the seat back and
the seat bottom.
the cover at the corner between the
seat back and the seat bottom. Tuck
the flap between the seat back and
the seat bottom.
Standard Seat Cover
Installation Instructions
For: Suzuki Samurai
Part Number: 29261