NEC R 37 Xtra User Manual
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG
WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS
THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE
CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may
have sufficient magnitude to cause electric shock. Therefore, it is danger-
ous to make any kind of contact with any part inside of this unit.
This symbol alerts the user that important literature concerning the opera-
tion and maintenance of this unit has been included. Therefore, it should
be read carefully in order to avoid any problems.
Warnings and Safety Precaution
The NEC MultiSync Multimedia monitors XP37 Xtra and XM37 Xtra are de-
signed and manufactured to provide long, trouble-free service. No mainte-
nance other than cleaning is required. Use a soft cloth and if necessary, mild
detergent. Do not use commercial spray cleaners which may damage the
surface. In case of damage, arrange for repairs at an authorized NEC Ser-
vice Center.
signed and manufactured to provide long, trouble-free service. No mainte-
nance other than cleaning is required. Use a soft cloth and if necessary, mild
detergent. Do not use commercial spray cleaners which may damage the
surface. In case of damage, arrange for repairs at an authorized NEC Ser-
vice Center.
For operating safety and to avoid damage to the unit, read carefully and
observe the following instructions.
observe the following instructions.
To avoid shock and fire hazards:
1. Provide adequate space for ventilation to avoid internal heat build-up.
Do not cover rear vents or install in a closed cabinet or shelves.
The unit is equipped with cooling fans on the top. If you enclose the unit in
a cabinet or rack, be sure there is adequate space at the top and rear of
the unit to allow heated air to rise and escape. A cabinet or shelves in
which the unit is placed must be maintained below 40
The unit is equipped with cooling fans on the top. If you enclose the unit in
a cabinet or rack, be sure there is adequate space at the top and rear of
the unit to allow heated air to rise and escape. A cabinet or shelves in
which the unit is placed must be maintained below 40
°
C
2. Do not use the power cord polarized plug with extension cords or outlets
unless the prongs can be completely inserted.
3. Do not expose unit to rain or moisture.
4. Avoid damage to the power cord, and do not attempt to modify the
4. Avoid damage to the power cord, and do not attempt to modify the
power cord. Do not place the unit on the power cord. Damage to the
cord may cause shock or fire.
Handle the power cord carefully and avoid excessive bending. A
damaged cord can cause electric shock or fire.
cord may cause shock or fire.
Handle the power cord carefully and avoid excessive bending. A
damaged cord can cause electric shock or fire.
5. Unplug unit during electrical storms or if unit will not be used over a long
period.
6. Do not open the cabinet which has potentially dangerous high voltage
components inside. If the unit is damaged in this way the warranty will be
void. Moreover, there is a serious risk of electric shock.
void. Moreover, there is a serious risk of electric shock.
7. Do not attempt to service or repair the unit. NEC is not liable for any bodily
harm or damage caused if unqualified persons attempt service or open
the back cover. Refer all service to authorized NEC Service Centers.
the back cover. Refer all service to authorized NEC Service Centers.
To avoid damage and prolong operating life:
1. Use only with 100-120V/220-240V 50/60Hz AC power supply. Continued
1. Use only with 100-120V/220-240V 50/60Hz AC power supply. Continued
operation at line voltages other than 100-120V/220-240 Volts AC will
shorten the life of the unit, and might even cause a fire hazard.
shorten the life of the unit, and might even cause a fire hazard.
2. Handle the unit carefully when moving and do not drop.
3. Locate set away from heat, excessive dust, and direct sunlight.
4. Protect the inside of the unit from liquids and small metal objects. In case
3. Locate set away from heat, excessive dust, and direct sunlight.
4. Protect the inside of the unit from liquids and small metal objects. In case
of accident, unplug the unit and have it serviced by an authorized NEC
Service Center.
Service Center.
5. Unplug unit before cleaning. Use only a soft cloth and mild detergent.
Commercial household sprays and cleaners may damage the CRT sur-
face and cabinet.
face and cabinet.
7. Do not place liquids on top of the unit. If liquid has been spilled into the
unit, unplug the unit and have it serviced by an authorized NEC Service
Center.
Center.
8. This unit is designed for indoor installation use only. Do not use the unit
for purposes other than originally intended.
9. Do not use the unit on an unstable surface.
10.Do not set the unit on end when in use or stock.
11.Rest your eyes periodically.
10.Do not set the unit on end when in use or stock.
11.Rest your eyes periodically.
DOC compliance Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Interference-Causing Equipment Regulations.
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
As an E
NERGY
S
TAR
® partner, NEC Technologies has determined that this product
meets the E
NERGY
S
TAR
® guidelines for energy efficiency.
E
NERGY
S
TAR
is a U.S. registered mark.