NEC R 37 Xtra User Manual

The Reset control allows you to return image parameters to factory presets.

The above warning statement will appear to confirm that you do want to reset

all raster settings. If you want to reset all raster settings, press PROCEED.

The following items can be reset:

H-POSITION, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER, V-

POSI, V-HEIGHT, V-LIN1, V-LIN2, KEYSTONE, TILT and ROTATION.

The above warning statement will appear to confirm that you do want to reset

all visual settings.  If you want to reset all visual settings, press PROCEED.

The following items can be reset:

BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP.,

R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.

The Volume control allows you to adjust the volume.

: Pressing + or - increases or decreases the volume.

NOTE: When you mutes the sound, the MUTE display appears.

If the monitor does not reproduce the color for a

component signal correctly, the monitor will select

YC

B

C

R

/YP

B

P

R

 in accordance with an output format of

the connected equipment such as DVD player or DTV

tuner.

Selecting RGB CTL allows you to adjust the Color,

Tint, Sharpness, Gamma, Dynamic Picture control for

RGB signals -provided horizontal frequencies of

these RGB signals must be 60 kHz and below.

This mode is recommended for displaying movie or

graphics.

NOTE: Component signals (YP

B

P

R

) refers to the

signals of 1920 x 1080/60/2:1 and 1280 x 720/60/

1:1.

: Pressing + s emphasizes the brightness of neutral

tint; - the darkness of neutral tint.

: Pressing + rotates OFF, LOW, MEDIUM or HIGH in

this order.

Selecting HIGH emphasizes black color on a picture.

: Increases or decreases the bass.

: Increases or decreases the treble.

: Adjusts the balance between the right and left speakers.

: Selects OFF, MOVIE, and MUSIC in this order.

1. OFF

: Turns off the surround effect.

2. MOVIE : Gives a surround effect for cinema.

3. MUSIC : Gives a surround effect for music.