Morphy Richards ib43015 User Manual

Using 

Normal use
1 Wherever possible fill through the spout,

as this helps to free the element from
limescale build-up.

• The integrated water level indicator

allows you to easily see the amount of
water in the kettle.

• Always ensure that the kettle is filled to

at least a level where the water is visible
through the level indicator.

• Boil only as much water as you need as

this saves electricity.

2 Place the kettle on the base unit,

ensuring the kettle locates on to the 360˚
connector.

• The 360˚ connector allows the kettle to

be located at any position. - ideal for left
and right handed users and convenient
positioning on worktop.

3 Plug in and switch on at the wall socket.
4 Switch the kettle on. The water level

gauge will illuminate.

5 When the water boils the kettle will

switch off automatically.

• If you are using the kettle for the first

time, pour away the boiled water and
refill.

6 Lift the kettle from the base unit by the

handle ensuring you hold the kettle level. 

• To re-boil, switch to ON again. If the

kettle has just switched off wait a minute
or so before switching it back on again.

• If you do not put in enough water, or

switch on the kettle when it is empty, the
safety cut-out will switch off the power
automatically. If this happens, refill and
wait a few minutes for the element to
cool, then use as normal.

Filter removal 

1 Open the lid.
2 Slide the filter away from the spout, from

its location, using the tab provided.

3 To refit the filter, slide it into the side wall

guides. Ensure the filter is correctly
located into the guide.

Lid release 

1 To open, press the lid release button

down and the lid will open.

4

KT43015 Rev 2  8/4/05  10:36 AM  Page 4