Runco cinemawall cw-42hd User Manual
Runco CinemaWall Owner’s Operating Manual
25
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
Using the On-Screen
Menus
To use the on-screen menus:
1. Press OK or MENU to display the Main Menu.
2. To select a menu item, use the up- or down-arrow buttons (
,
) on the remote
control to highlight it.
3. Press OK or MENU to access that menu.
4. Use the up- or down-arrow buttons (
,
) to select the setting you want to change.
Then, press OK or MENU.
5. Press the right- or left-arrow button (
,
) to change that setting. (If you do not do
this within five seconds, the slidebar disappears.)
6. To return to the previous menu, press EXIT (
). If the Main Menu is on-screen,
pressing EXIT hides the OSD menu.
The CinemaWall OSD menus are arranged hierarchically, as shown in Figure 4-2.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
1. The native resolution of the CW-50XA and CW-61 is 1365 x 768;
the native resolution of the CW-42HD is 1024 x 768. Other
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.
2. With most computers, you can get the best picture at 1024 x
768 @ 60Hz.
3. The CinemaWall supports 36-bit color (68.7 billion possible
colors).
To prevent image retention (burn-in) on your display,
ALWAYS use
a screen saver and set it to the shortest possible time.
Note
WARNING