Morphy Richards ib29015 User Manual

P.5

P.6

P.7

Before any alarm functions can be used on your cd alarm clock radio you
must first set the clock to the correct time.
1 Place the unit on a flat surface. Plug the mains plug into the wall socket and

switch on the wall socket.

2 The clock LED display will show 12:00.
3 Press and hold the TIME button (29) and MINUTE or HOUR (17) to adjust to

your desired time.

4 Release the TIME button (29) to store your setting in memory.
5 The PM indicator (35) will illuminate to indicate 12.00 midday has been

reached.

FM wire aerial
To obtain the maximum FM reception fully extend the wire FM aerial (which is
located at the rear of the unit) and alter the direction of the wire for best results.

The aerial for the AM waveband is located inside the unit. To obtain the maximum
AM reception rotate the cd clock radio.
1 Switch to radio position with the FUNCTION SELECTOR (8).
2 Select your desired band by using the BAND switch (4).
3 Press the POWER button (25).
4 Adjust the VOLUME (5) to the desired level.
5 Select your desired radio station (3) and (33).
6 To stop listening to the radio press POWER button (25).

1 Open the CD door (1). Load your disc (label side up) into CD compartment

(2).

2 Switch to the CD position using the FUNCTION SELECTOR (8).
3 Press POWER (25), the Display (32) will show total track numbers. It will

return to the clock time after a few seconds.

4 Press (19) PLAY/PAUSE button to start listening from the first track. The

Display (32) will show 01.
NOTE: Also use this button to momentarily suspend the playing track.
Press once again to continue playing.

5 Rotate the VOLUME (5) to adjust the desired level.
6 Press „(18) STOP button to stop listening to the disc.

SKIP SEARCH (17) : Press SEARCH to skip forward to the next track or
repeatedly to skiptracks. Press SKIP to return to the beginning of the track, or
press repeatedly to skip backwards several tracks. Press and hold SKIP or
SEARCH to search quickly within a track.

REPEAT (15)
Press once to repeat your selected track. REPEAT indicator (21) blinks.
Press twice to play the disc continuously. REPEAT indicator (21) illuminates.
Press again to switch off this function. REPEAT indicator (21) goes off.

PROGRAM (26)
To set your own musical program.
1 Insert the disc (1,2). The total number of tracks is displayed (32).
2 Press (26), the display shows “P01”. PROGRAM indicator (23) blinks.
3 Select with SKIP or SEARCH (17) to find your desired track, then press the

PTS PROGRAM button (26) to store your program in memory. Repeat this
operation as many times as necessary. 20 tracks can be stored.

4 Press (19) PLAY/PAUSE to start playing.
5 Press „ STOP (18) to stop the disc.
6 To cancel this function, open the CD compartment.

RANDOM :
1 Press RANDOM (16) to select RANDOM play mode and it will randomly play

all the tracks on the CD. The RANDOM indicator (22) will illuminate.

This unit allows you to set two different wake up times which you can choose to
use independently or simultaneously AL1 or AL2, AL1 and 2.

 Alarm (AL1) : Press and hold the ALARM 1 button (27), and press SKIP or

SEARCH (17) to adjust your desired alarm time, then release ALARM 1 (27) to
store your setting in memory.
2

 Alarm (AL2) : Press and hold the ALARM 2 button (30) and repeat the same

operation as above.
•

Select your alarm wake-up mode (6) in AUTO (for RADIO or CD), BUZZER
(for alarm sound) or OFF to switch off the alarm.

•

Select your wake-up time with the alarm selector (7).

Wake Up to the Buzzer Sound
Switch to the BUZZER position using ALARM MODE switch (6), the alarm LED
indicator (31 and/or 34) will light.

 Wake Up to the Radio
1 Follow procedures 1 to 6 in “LISTENING TO THE RADIO”, to select your

desired radio station.

2 Switch the ALARM MODE switch to the AUTO position (6), the alarm indicator

(31 and/or 34) will light.

Wake up to the CD
1 Follow procedures 1 to 6 in “LISTENING TO THE CD PLAYER”.
2 Switch ALARM MODE switch to the AUTO (6) position, the alarm LED

indicator (31 and/or 34) will light.

3 Press POWER (25) and POWER indicator (24) goes off.

NOTE: If the CD play time is longer than 60 minutes, the music will stop
after playing 60 minutes.

Wake Up to the Programmable CD Tracks
1 Switch to the CD position (8) and press POWER (25).  POWER indicator (24)

will light.

2 Follow procedures 1 to 5 in “LISTENING TO THE CD PLAYER - PROGRAM”.
3 Switch the ALARM MODE switch to the AUTO (6) position, the alarm LED

indicator (31 and/or 34) will light.

4 Press POWER (25) and POWER and PROGRAM  indicators (23, 24) will go

off.
NOTE: The music will stop after the programmed tracks, eg, if one track is
programmed the alarm will stop at the end of this track. The programmed
memory will be erased once the CD door is opened.

The alarm is programmed to run for 60 mins.
1 SNOOZE (9) : Press to stop the alarm temporarily, the alarm will stop and

ring again automatically, after 6mins.

2 POWER (25) : The alarm will stop, and will sound again 24 hours later.
3 OFF (6) : To turn off the alarm permanently switch the ALARM MODE switch

to the off position. The alarm LED indicators (31, 34) will go off.

1 Select the FUNCTION SELECTOR to CD/Radio (8) for the sleep mode.
2 Press SLEEP (28), the display shows “—“, press again to select the desired

sleep time. (there are three sleep times 90-60-30 minutes).  It will countdown
after a few seconds.

3 If in CD mode, press  PLAY/PAUSE (19) to play the CD.
4 Press POWER (25) to stop.

NOTE : If the CD play time is shorter than your selected sleep time, the
music will stop at the end of the disc.

AC Power supply :

230v 

 50Hz

Battery back-up :

9V DC type 6LR61/PP3 (not included)

Radio

:

FM 88Mhz - 108MHz

:

AM 530Khz - 1600kHz

WARNING: to reduce the risk of electric shock, do not expose this appliance
to rain or moisture.

Morphy Richards products are manufactured to internationally accepted quality

standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.

If your product proves to be defective within 28 days of purchase, your Morphy

Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.

Should your product develop a defect within the guarantee period but after

the replacement period, please return the product to the following address,
together with the proof of purchase, brief details of the symptoms and your own
name and address.

Registered address

Morphy Richards Limited

Mexborough

South Yorkshire

S64 8AJ

Your post office will provide a certificate of posting. The product will be

repaired and returned to you promptly.

Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614
Republic of Ireland 1800 409119
Replacement parts 0870 167 6645

AD29015M UK   Rev 2

ATTENTION: To reduce the risk of electric shock, do not remove
the cover. There are no user serviceable parts inside the unit. Refer
any servicing to qualified personnel.

The lightning flash with arrowhead symbol within the triangle is a warning sign
alerting the user of ‘dangerous voltage’ inside the unit.

The exclamation point within the triangle is a warning sign alerting the user
of important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing.

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid
exposure to the beam.