Vacuflo FC650 User Manual

The dirt canister – where the vacuumed dirt

is deposited – is the removable lower portion

of the power unit. The canister needs to be

removed and emptied when it is 2/3 full.

The filter cartridge should be replaced once

a year.
NOTE: When the dirt canister is removed

the Cyclonic Cone will be visible. The cone

is held in place with a friction seal designed

to hold the cone to the body of the power

unit when the canister is removed. The cone

can be removed by pulling on it. This allows

access to the replaceable pleated filter.

Make sure the Power Unit is OFF.
1. Unlatch and remove the Dirt Canister.

Latches are located on opposite sides of

the power unit.

2. Remove the Cyclonic Cone.

3. Turn the filter latch (counter-clockwise) on

the bottom of the filter and align it with

the slots in the filter base.

4. Remove the old filter and replace it with a

new pleated filter. Use filter part number

8106-01 for models FC300, FC550 and

FC650 and filter part number 8107-01

for model FC1550.

5.

Lock the filter in place by turning the

filter latch clockwise until you feel it snap.

6. Dispose of the dirt and debris captured in

the dirt canister.

7. Seat the Cyclonic Cone in the dirt

canister.

8. Raise the dirt canister to the base of

the power unit and engage the latches.

Be certain the dirt canister is “seated”

properly to the gasket on the body of the

power unit.

  MODELS: FC300, FC550, FC650 & FC1550  •  VACUFLO

®

 Filtered Cyclonic

™