Humminbird di combo 4090501 User Manual
12
MARK Key
Press the MARK key while in any view to mark the position of a
waypoint. The MARK key function works if you have the GPS
receiver connected.
waypoint. The MARK key function works if you have the GPS
receiver connected.
• Active Cursor: The waypoint will be marked at the cursor location.
• Without Active Cursor: The waypoint will be marked at the boat
location.
• If Screen Snapshot is active, a waypoint will be created, and a screen
snapshot will also be saved to the optional-purchase SD card (see
Views: Snapshot and Recording View). Navigation is not affected by
the Screen Snapshot feature.
Views: Snapshot and Recording View). Navigation is not affected by
the Screen Snapshot feature.
NOTE: If Screen Snapshot is enabled but there is not a GPS receiver connected,
pressing the MARK key will capture the screen image and display an error saying
that a GPS position fix is required to create a waypoint.
pressing the MARK key will capture the screen image and display an error saying
that a GPS position fix is required to create a waypoint.
NOTE: You must have an optional-purchase SD card installed for the screen
snapshot feature to work.
snapshot feature to work.
GOTO Key
The GOTO key has multiple functions, which depend on the
situation.
situation.
• Active Cursor: Press the GOTO key while in any view to create a
waypoint and start navigation towards that waypoint.
• Without Active Cursor: Press the GOTO key to display the saved
waypoints list, and then highlight a waypoint. Press the RIGHT Cursor
key to begin navigation.
key to begin navigation.
ZOOM (+/–) Key
The Zoom (+/–) key has multiple functions, depending on
the situation:
the situation:
• In any of the Chart Views or the Sonar Zoom View, press the
+/– Zoom key to change the scale of the view to appear closer or farther
away. See Views and Introduction to Navigation for more information.
away. See Views and Introduction to Navigation for more information.
Key Functions