Zoom 4420-A User Manual

If there are devices on your home or office network that support 
WiFi Protected Setup (WPS), this protocol can greatly simplify 
the process of configuring WPA2 or WPA security on the 
devices.  

 

With WPS, you set security on one network device at a time. 
When WPS is initiated on the AP+4, it attempts for 2 minutes to 
associate with the device. When an association is made, the 
AP+4 then sends its network name and security key, in 
encrypted form. 
At the Client PIN Number option, enter the network device's PIN 
number and then click Start PIN. This is the most secure 
method, because only a device with the Client PIN can associate 
with the AP+4. The PIN may be printed on a sticker on the 
device, or there may be a display showing the PIN. 
Alternatively, if the device has a hardware Secure Setup or 
similarly named button, or a virtual pushbutton on a software 
display, you can use the Push Button Configuration (PBC) 
option. 

34 

 

Zoom AP+4 User Guide