Zoom ADSL X3 User Manual

Chapter 3: Advanced Setup Options

41

If you have changed the system settings on your X3 and for some
reason want to restore them to the factory default settings, you can

do so in one of two ways: You can perform a software reset or a

hard reset.

If you can open your Web browser and access your X3’s user

interface, do the following to perform a software reset:

1111 

Log into the Zoom Configuration Manager and click the
Advanced Setup icon to open the Advanced Setup page.

(See page 15 if you need help logging in.)

2222 

In the Administration section, click the Reboot button.

3333 

From the Reboot Mode drop-down list, select Reboot From
Default Configuration.

4444 

Click the Reboot button. Once this process is complete, your
unit is reset to its factory settings.

If you lose your link to the unit and cannot communicate with it

via the Web browser, do the following to perform a hard reset:

1111 

Insert a paper clip into the RESET pinhole in the center of
the modem’s back panel.

2222 

Hold it there for five seconds. The unit’s LINK light will turn
off and then it will blink slowly, about once per second.

You are now guaranteed that all system settings are restored to the

X3’s factory defaults.