Fujitsu TX200FT S2 User Manual

Checking location before installing the server

Conditions

��

�

��

�

��

�

��

■Installing the server to the rack

Make sure to contact an office listed in the "Contact Information" before attempting to install or remove the serv-

er from the rack.

Remove the inner rail from the slide

rail.

Pull out the inner rail while pushing on the lock.

Attach the inner rails to the right and

left side of the server.

Secure the inner rails to 3 places on both the right

and left side of the server using M4 screws.

Open both the front and rear doors of

the rack.

Decide where to attach the slide rail

and rack nuts.

Choose the height at which to place the server in

the rack by aligning the base of the sever with one

of the narrower spaces (Refer to the figure below)

in the rack bracket.

��

Inner rail

M4 screws

* Also secure the opposite side in the same way