Hotpoint KSO53CX S User Manual

Page of 16
4
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Installation
! Please keep this instruction booklet in a safe place for 
future reference. If the appliance is sold, given away or 
moved, please make sure the booklet is also passed on to 
the new owners so that they may benefit from the advice 
contained within it.
! Please read this instruction manual carefully: it contains 
important information concerning the safe operation, 
installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging material; it 
should be disposed of in accordance with local separated 
waste collection standards (see Precautions and tips).
! The appliance must be installed by a qualified professional 
in accordance with the instructions provided. Incorrect 
installation may damage property or cause harm to people 
or animals.
Built-in appliances
Use an appropriate cabinet to ensure that the appliance 
operates properly:
•  The panels adjacent to the oven must be made of heat-
resistant material.
•  Cabinets with a veneer exterior must be assembled with 
glues which can withstand temperatures of up to 100°C.
•  To install the oven 
under the counter (see diagram) or 
in a 
kitchen unit, the cabinet must have the following 
dimensions:
595 mm.
595 mm.
25 mm.
545 mm.
5 mm.
567 mm.
23 mm.
575-585 mm.
45 mm.
558 mm.
547 mm. min.
! The appliance must not come into contact with electrical 
parts once it has been installed. 
The indications for consumption given on the data plate 
have been calculated for this type of installation.
Ventilation
To ensure adequate ventilation, the back panel of the 
cabinet must be removed. It is advisable to install the oven 
so that it rests on two strips of wood, or on a completely 
flat surface with an opening of at least 45 x 560 mm (see 
diagrams).
 
560 mm
.
45 mm.
Centring and fixing
Position the 4 tabs on the side of the oven so that they are 
lined up with the 4 holes on the outer frame. Adjust the 
tabs according to the thickness of the cabinet side panel, 
as shown below:
20 mm thick: take off the removable 
part of the tab (see diagram).;
18 mm thick: use the first groove, 
which has already been set in the 
factory (see diagram).
16 mm thick: use the second 
groove (see diagram).
Secure the appliance to the cabinet by opening the oven 
door and putting 4 screws into the 4 holes on the outer 
frame.
! All parts which ensure the safe operation of the appliance 
must not be removable without the aid of a tool.