Honeywell av8or User Manual

AV8OR User’s Guide                         Automotive Mode Operation 
 

Pub. No D200803000008         Page 4-52     Revision July 2008. 

© Honeywell International Inc. Do not copy without express permission of 

explained starting from the Navigation menu. 

1.  Tap the following soft Keys: 

 

 

 

2. [optional] 

Tap 

 to change the format of 

the displayed coordinates.  
 

3.  Tap the latitude or longitude value to change the coordinate.  

 

4.  Enter the coordinate values in WGS84 format on the keyboard: 

the latitude (N or S) and the longitude (E or W).  
 

5. Tap 

 

 

6. The map appears with the selected point in the middle. Tap  

(Simple mode) or 

 

(Advanced mode) from the Cursor menu. The route is then 
automatically calculated, and you can start navigating.  

 
Multi-point routes are created from simple routes, so a route must be 
active first. One of the ways of expanding the route is to keep the 
destination, and to add via points (intermediate destinations).  
This feature is available in Advanced mode only.  
1.  Select a new location as you did in the previous sections. This 

will be the additional destination in the route.  

2.  The map appears with the selected point in the middle, and the 

Cursor menu opens automatically.  

 
 

3. Tap 

 to add the point as an 

intermediate destination preceding the final destination of the 
route.