Hannspree t094 User Manual
50
12
Troubleshooting
Situation
Solution
No picture and sound.
•
Connect the power cord properly.
•
Check if the power LED is on or not.
•
Press power on the control panel or remote
control.
control.
•
Press source to cycle through connected
video sources.
video sources.
•
Press channel up or channel down to
switch to other TV stations.
switch to other TV stations.
•
Make sure all cables are connected
properly.
properly.
No picture, or poor picture, sound is OK.
•
Check the antenna and cable connections.
•
Adjust the brightness in the OSD menus.
See “Color Temperature” on page 34.
See “Color Temperature” on page 34.
Picture is not in color.
•
Adjust the saturation in the OSD menus.
See “Color Temperature” on page 34.
See “Color Temperature” on page 34.
•
Make sure all the cables are connected
properly.
properly.
Picture is OK, no sound.
•
Make sure the source device is functioning
properly.
•
•
Make sure the audio cable is connected
securely.
securely.
•
Turn the mute off.
•
Press volume up on the control panel or
remote control.
remote control.
One of the speakers has no sound.
•
Adjust the balance in the OSD menus. See
“Balance” on page 38.
“Balance” on page 38.
•
Make sure the audio cable is connected
securely.
securely.
Cannot receive some TV channels using
cable TV.
cable TV.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
page 43.
“TV Setting” menu. See “Auto Program” on
page 43.
Want to reset TV settings.
•
Use the Reset function in the OSD menu.
See “Preset” on page 35.
See “Preset” on page 35.
Cannot operate menus.
•
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
system is in a state such that those settings
are not available.