Kensington MP-700 User Manual
30
Basic Operation
■ Preparation
1
Connect the power cord.
The projector is in the standby mode, and the power indicator
LED lights (red).
Press the POWER button. The fan spins, the LED lights, and
the ON/STANDBY LED lights (green).
The LAMP/COVER LED lights (green).
If the LAMP/COVER LED lights red after turning on the
POWER button, then there is something wrong. (See page 62
for details.)
the ON/STANDBY LED lights (green).
The LAMP/COVER LED lights (green).
If the LAMP/COVER LED lights red after turning on the
POWER button, then there is something wrong. (See page 62
for details.)
NOTE
Make sure that the lens cap has been removed before turning on the power.
2
Select the external input device.
Select the video source to be displayed from OHP, PC1/PC2,
or VIDEO.
or VIDEO.
NOTE
When PC/VIDEO is selected and the device is not connected, or the connected device is not turned on, “No
input” is displayed.
input” is displayed.
Remote Control Operation
Main Unit Operation
VIDEO
PC1/PC2
OHP
ON/STANDBY
LAMP/COVER
TEMP
1
2
The selected input display is displayed.
OHP
PC/video
See page 38.
See page 31.
OHP
PC1/PC2
VIDEO
Cha.05-1
04.7.29, 11:47 AM
30