Viper 3303 User Manual

25

© 2009 Directed Electronics. All rights reserved.

Prepare the system

Open 

1. a 

door.

Turn

2. 

 the ignition on. 

Press

3. 

 and release then press and hold the control center button. 

The control center LED flashes and the siren chirps one time to 
confirm the system is prepared.
Release

4. 

 the control center button and proceed below.

Note: Begin pairing within 60 seconds or the system will exit (indi-
cated by a long siren chirp) and will need to be prepared again.

Prepare the remote control
Select the desired Car 1 (Default) or Car 2 operation before proceed-
ing.

Press

1.  

and 

hold the 

button of the remote control until a long 

beep is emitted and  

 is displayed (If programmed to 

operate two systems, confirm the correct car 1 or car 2 text and 
beeps at 3 seconds).
Release the 

2. 

button to view the main menu.  

 is 

displayed. 
Press

3. 

 and release the 

 button two times.  

 is 

displayed. 
Press

4.  

and 

hold the 

button until 

 is displayed, and then 

release it.
Press

5.  

and 

hold the 

 button until the siren emits a long chirp. 

 is displayed with a sequence of chimes. 

Note: If 

 is displayed, make sure the system is still pre-

pared and repeat step 5 until successful.