Viper 3303 User Manual
28
© 2009 Directed Electronics. All rights reserved.
Full Silent Arm Protection
Sensor warn-away, sensor full trigger and point of entry activations
will only send messages to the remote, with parking light flash and
siren outputs defeated.
will only send messages to the remote, with parking light flash and
siren outputs defeated.
Sensor Warn-away Messages
When the remote receives a sensor warn-away message it emits 10
beeps (if on) and displays a sensor zone specific
beeps (if on) and displays a sensor zone specific
SENSOR WARN
text
for 30 seconds. Warn-away messages cannot be reviewed or dis-
played in reports.
played in reports.
Full Trigger Messages
A full trigger message generates a full trigger output of siren tones and
zone specific
zone specific
TRIGGER
text followed by an alert that consists of 1
long beep per minute for 10 minutes.
To stop the output and alert, press a command button to perform a
command, or Press the
To stop the output and alert, press a command button to perform a
command, or Press the
button.
Emergency Override
The following procedure disarms the system when a programmed re-
mote is not available. Number of presses__________
mote is not available. Number of presses__________
Turn
1.
the ignition on.
Press
2.
the control center button the correct number of times
(the default is 1 press).
After a few seconds the siren output ceases and the system
After a few seconds the siren output ceases and the system
3.
is disarmed.
Note
As a precaution, if programmed for passive arming or auto
re-arming the system should be placed into valet mode until
a remote is available .
re-arming the system should be placed into valet mode until
a remote is available .