Viper 3303 User Manual

Using the 1-way Companion remote

The 1-way companion remote commands the system features as
shown in the previous table, but only transmits and does not provide
feedback as with the 2-way remote control. Siren chirps and parking
light ﬂashes are used to indicate that a command has been received
and activated as described in the Basic Commands and Advanced
Commands sections.

Accessing Commands

Similar to the Responder LC remote, basic commands are performed
when a command button is pressed directly. To perform advanced
commands press the

button one to four times to access function

levels. For example;

x4 in the table implies pressing

four times

to reach level 4. The transmit LED ﬂashes in groups of 1 to 4 for a few
seconds to indicate the respective level. Press the desired command
button while the transmit LED is ﬂashing to perform the command.

Button Auto Lock

When on, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked,
the remote control appears to be non-operational and will not transmit
a command or illuminate the transmit LED. To unlock the buttons; press
the

button followed by the

button.

Car Select

Car 2

must ﬁrst be turned on (See Remote Features menu under Pro-

gramming section below to turn on). Press and hold the

button

for 3 seconds. The remote ﬂashes the transmit LED once or twice to
indicate the selected car is 1 or 2.

Release the

button, then press and release while the transmit

LED ﬂashes to perform car select. Once the car is selected a command