ZyXEL Communications NWA3160 User Manual

Chapter 7 System Screens

ZyXEL NWA-3160 Series User’s Guide

When you turn on the ZyXEL Device for the first time, the date and time start at 2000-01-01 
00:00:00. When you select Auto in the SYSTEM > Time Setting screen, the ZyXEL Device 
then attempts to synchronize with one of the following pre-defined list of NTP time servers. 
The ZyXEL Device continues to use the following pre-defined list of NTP time servers if you 
do not specify a time server or it cannot synchronize with the time server you specified. 

When the ZyXEL Device uses the pre-defined list of NTP time servers, it randomly selects 
one server and tries to synchronize with it. If the synchronization fails, then the ZyXEL 
Device goes through the rest of the list in order from the first one tried until either it is 
successful or all the pre-defined NTP time servers have been tried.

Apply

Click Apply to save your changes.

Reset

Click Reset to reload the previous configuration for this screen.

Table 25   SYSTEM > Time Setting

Table 26   Default Time Servers

ntp1.cs.wisc.edu

ntp1.gbg.netnod.se

ntp2.cs.wisc.edu

tock.usno.navy.mil

ntp3.cs.wisc.edu

ntp.cs.strath.ac.uk

ntp1.sp.se

time1.stupi.se

tick.stdtime.gov.tw

tock.stdtime.gov.tw

time.stdtime.gov.tw