ZyXEL Communications NWA3160 User Manual
Chapter 2 Introducing the Web Configurator
ZyXEL NWA-3160 Series User’s Guide
42
If you have more than one ZyXEL Device on your network (that uses the default System
Name) or if you are not sure of your ZyXEL Device’s System Name, use one of the
following methods to access the web configurator:
• Enter the ZyXEL Device’s LAN IP address in your browser’s address bar and press
Name) or if you are not sure of your ZyXEL Device’s System Name, use one of the
following methods to access the web configurator:
• Enter the ZyXEL Device’s LAN IP address in your browser’s address bar and press
[ENTER]. The default IP address is 192.168.1.2. See
information on locating and changing the ZyXEL Device’s IP.
• Alternatively, enter zyxelXX:XX:XX in your browser’s address bar, where
XX:XX:XX represents the final six characters of your ZyXEL Device’s MAC (Media
Access Control) address. The MAC address is usually printed on a label on the
ZyXEL Device.
Access Control) address. The MAC address is usually printed on a label on the
ZyXEL Device.
"
The ZyXEL Device has a MAC address for each of its interfaces; for example,
one for the wired interface (LAN, or Local Area Network) and one for the
wireless interface (WLAN, or Wireless Local Area Network). Use the LAN MAC
address when accessing the ZyXEL Device over the wired network, and use the
WLAN MAC address when accessing the ZyXEL Device over the wireless
interface.
one for the wired interface (LAN, or Local Area Network) and one for the
wireless interface (WLAN, or Wireless Local Area Network). Use the LAN MAC
address when accessing the ZyXEL Device over the wired network, and use the
WLAN MAC address when accessing the ZyXEL Device over the wireless
interface.
4 Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
5 You
should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) then click Apply.
Alternatively, click Ignore.
Alternatively, click Ignore.
"
If you do not change the password, the following screen appears every time
you login.
you login.
Figure 9 Change Password Screen