ZyXEL Communications NWA3160 User Manual
Chapter 5 Management Mode
ZyXEL NWA-3160 Series User’s Guide
80
Managed AP
Select this to have the ZyXEL Device managed by another ZyXEL Device
on your network.
When you do this, the ZyXEL Device can be configured ONLY by the
When you do this, the ZyXEL Device can be configured ONLY by the
management AP.
If you do not have an AP controller on your network and want to return the
If you do not have an AP controller on your network and want to return the
ZyXEL Device to standalone mode, you must use its physical RESET
button. All settings are returned to their default values.
Note: When you set the ZyXEL Device to Managed AP
mode, it becomes a DHCP client. To discover its
new IP address, check the DHCP server on your
network. If your network has no DHCP server, the
ZyXEL Device’s IP address remains the same. You
can also check the Controller > AP Lists screen of
the AP controller on your network.
new IP address, check the DHCP server on your
network. If your network has no DHCP server, the
ZyXEL Device’s IP address remains the same. You
can also check the Controller > AP Lists screen of
the AP controller on your network.
Apply
Click this to save your changes.
Note: If you change the mode in this screen, the ZyXEL
Device restarts. Wait a short while before you
attempt to log in again. If you changed the mode to
Managed AP, you cannot log in as the web
configurator is disabled; you must manage the
ZyXEL Device through the management AP on
your network.
attempt to log in again. If you changed the mode to
Managed AP, you cannot log in as the web
configurator is disabled; you must manage the
ZyXEL Device through the management AP on
your network.
Reset
Click this to return this screen to its previously-saved settings.
Table 11 The Management Mode Screen
LABEL
DESCRIPTION